Power Inverter Series 2000 |
|
Input:
Out:
Freq.:
Power: |
12V - 24V
220, 230 Vac or 115Vac
50 - 60 - 400Hz
250VA to 6KVA |
Typical applications: |
|
The inverter series 2000 are designed to supply electronic equipment, spectrum analyzer, critical military, medical and telecommunications applications that needs pure sine wave with distortion <1% and a voltage regulation better then 0.5%. All the inverter includes the auto power off function that reduces the stand by current to zero.
|
More Info |
|
Power Inverter Series STC |
|
Input:
Out:
Freq.:
Power: |
12V - 24V
220Vac o 115Vac
50 - 60Hz
300VA to 12KVA |
Typical applications: |
|
The inverter series STC are suited to supply continuous and discontinuous loads with high surge power. The main characteristics are high efficiency and low sine wave distortion (THD<3%). Like the series 2000 all the inverters stc, include the auto power off function. These inverter are used in special vehicles, photo voltaic and eolic applications.
|
| More Info |
|
|
Power Inverter Series PWM |
|
Input:
Out:
Freq.:
Power: |
48 - 60 - 72 - 110 Vdc
220Vac o 115Vac
50 - 60 Hz.
100VA to 6KVA |
Typical applications: |
|
These sinusoidal PWM inverter are destined for heavy duty industrial plants. Their main applications range from chemical industry to hydroelectric and thermoelectric plants, for telecommunications and radio-tv applications.
The high current surge allow the use in combination with air compressor, pump, air conditioning etc.
|
| More info |
|
Power Inverter Series NG |
|
Input:
Out:
Freq.:
Power: |
12V - 24V
Programmabile 0-250Vac
Programm. from 45 to 80Hz
from 250VA to 6KVA |
Typical applications: |
|
The inverter series NG are destined for testing laboratories and quality control. Fully microprocessor controlled, these inverters allow easy configuration of output voltage and frequency.
The pure output sine wave with very low distortion (less than 1%) and the output load regulation (better than 0,5%) make this inverter the best instrument to test devices destined to world wide locations.
|
| More info |
|
|
Single phase Battery Chargers |
|
Input:
Out:
Freq.:
Power:
Current: |
220 o 110Vac
12V-24V-48V-60V-110V
50 - 60 - 400 Hz.
from 250VA to 8KVA
from 2 to 320Adc |
Typical applications: |
|
Fully automatic microprocessor controlled battery charger are designed for Pb gel and Ni-Cd batteries. The charging curves and parameters can be changed using the local keyboard and display or the remote control RC162.
All the battery charger series NG, includes an opto-isolated rs-232 that allow to control up to six battery charger with a single rs232 port.
|
| More info |
|
Three phase Battery Chargers |
|
Input:
Out:
Freq.:
Power:
Corrente: |
380Vac trifase
24V-48V-60V-110V
50 - 60 -400 Hz.
from 4KVA to 15KVA
from 10 to 640Adc |
Typical applications: |
|
In addition to the single phase version, the three phase battery chargers offer a power range up to 15KVA (for continuous duty) and the availability (on request) of multiple independent outputs.
|
| More info |
|
|
Boost (step-up) dc-dc converter |
|
Input:
Out:
Power: |
12V - 24V - 48V
12V - 24V - 48V - 110V
from 125 watt to 6 KW |
Typical applications: |
|
The boost dc-dc converters are available in two versions: non-isolated and isolated. These converters are useful wherever is needed an efficient voltage conversion.
|
| More info |
|
Buck (step down) dc-dc converter |
|
Input:
Out:
Power: |
12-24-48-110-1500Vdc
5-12-24-48-60-110Vdc
from 125 watt to 6 KW |
Typical applications: |
|
As the boost converter, are available the two version: isolated and non-isolated. Are also available special version with input voltage up to 1500Vdc. |
| more info |
|
Homepage
Inverter 2000
Remote control RC162